PRODUKTE | Hydrostatische Antriebe
TYPE : OPS923/H-CD CREEP DRIVE
| HYDROSTATIC CASE MODULE | |||
| Maximum continuous torque | 5,500 (Nm) | ||
| Maximum intermittent torque | max 7,800 (Nm) | ||
| Maximum speed | 3,100 Rpm | ||
| Available drive ratios | Standard 1/4,41 * Special Hydraulic motor ratio is: i= 1:17,28 | 22 | 31 |
||
|
Speed Decreaser |
5.4 / 10.35 / 12.21 / 15.29 / 17.75 / 21.45 / 31.80 / 36.24 |
||
| MAIN DRIVE | |||
| Maximum continuous torque | 3.000 Kgm | 30.000 Nm | ||
| Maximum intermittent torque | 3.500 Kgm | 35.000 Nm | ||
| Maximum intermittent torque (special version) | |||
| Maximum speed | 3.300 (rpm) | ||
| AUXILIARY OUTPUTS | |||
| 1-UPPER POWER TAKE-OFF | |||
| Maximum power available at the shaft Maximum intermittent available torque Power take-off operational with vehicle |
From 340 (kW)* to 380 (kW)* 2.200 (Nm)* Stationary and in motion |
||
| Ratio | 1/1,28 (standard), 1:1 (special) | ||
| 2-INTERMEDIATE POWER TAKE-OFF (Hydraulic) | |||
| Maximum power available at the shaft Power take-off operational with vehicle |
|||
| Ratio | 1/1,23 | ||
| Shaft distance | 438 mm | ||
| * Contact us for higher power, torque, or special ratio requirements. | |||
| * OPS 923 series can transmit 4,200 NM torque at 2.000 RPM | |||
| DESCRIPTION: For Hydrostatic and Mechanical Transmission. Creep Drive. Dual-clutch drive for top Hydraulic pumps and hydrostatic driveline for creep control. * Equivalent to PFT-PCH/3000 The Transfer Case OPS923/H with a hydrostatic case module mounted at the main transmission output. It has been designed primarily for dry vacuum equipment, road and airport maintenance vehicles for asphalt regeneration, and vehicles for hi-rail applications. |
|||
* The original part numbers, reference numbers and brand names are used only for identification purposes. They do not imply that the products are original (OEM).