PRODUCTS | SPLIT SHAFT PTO
| Main Drive | |
|---|---|
| Max. continuous torque Max. intermittent torque Max.Speed | 2.141 Kgm | 21.000 Nm 3.000 Kgm | 29.419 Nm 2,500 – 3,300 RPM |
| Auxiliary Outputs Available outputs Pneumatic Clutch | Mechanical | Hydraulic | |
| Max. power available at shaft Max. torque available at shaft | 110 (kW) *(130 kW) 122 Kgm | 1.200 Nm* |
| Max. output speed | 2.500 (rpm) |
| Available drive ratios Power take-off operational with vehicle | 1 to 1.27 (standard) ; 1 to 1 (special) Stationary (standard) ; in motion (special) |
| Available Outputs Hydraulic* | |
| Max Torque available at shaft | 40 Kgm | 400 (Nm)* |
| Max power available at shaft | 35 (kW)* |
| Available drive ratios Power take-off operational with vehicle | 1 to 1,62 Stationary (standard) ; in motion (special) |
* Contact us for higher power or torque requirements.
Description
OPH-3000K Truck size range: 16-40 ton trucks. Equivalent to PFT-PC4/3000
OPH-3000K/S equivalent to single output PFT-PC2/3000
OPH-3000K/H direct hydraulic pump mounted. Designed for hydraulic-driven hydrovac vehicles.
Muncie SSH2 & SSV2/4 SERIES POWER TAKE-OFF (3290220202, 3290120202), Horizontal Split Shaft (SSH).
PZB 3.2.90.1.(32901) and 3.2.90.2.(32902), 42901, 429012.
Weight: 183 kg
| Main Drive | |
|---|---|
| Torque | 2000 Kgm | 19613 Nm |
| Auxiliary Outputs | |
| Max Torque available at the shaft | 90 Kgm | 882 Nm |
| Max. output speed | 1500 (rpm) - 140 kw |
| Output ratio | 1/1,43 |
| Available Outputs Hydraulic | |
| Torque | 40 Kgm | 392 Nm |
| Available drive ratios | 1/1,65 |
Description
OPH-2000K is suitable for 8-16 ton trucks. WITH CLUTCH.
* OPH-2000K/H: Hydrostatic version is available
| Main Drive | |
|---|---|
| Torque | 400 kgm | 3922 Nm |
| Auxiliary outputs | |
| Max torque available at the shaft | 60 kg |
| Max. Output speed | 1500 (rpm) |
| Output ratio | 1 / 1.25 |
| Available outputs hydraulic | |
| Torque | 40 kgm |
| Available drive ratios | 1 / 1.65 |
Description: Weight 45 kg. Truck size range: 3-8 ton trucks. WITH CLUTCH.
* OPH-400K/H: Hydrostatic version is available
| Main Drive | |
|---|---|
| Torque | 3.000 Kgm I 29.419 Nm |
| Auxiliary Outputs | |
| Max Torque available at the shaft | 110 Kgm | 1.078 Nm |
| Max. output speed | - (rpm) |
| Output ratio | 1 / 1.28 |
| Transfer Ratio | 1 / 1.62 |
| Control | Air |
| Max. Output power | 110 kW |
Description
Weight 183 kg
OPH-3000K-B has been specially designed for concrete pumps and drilling rigs.
Suitable for Sermac, Cifa, etc concrete pumps.
Equivalent to PFT-PC6/3000, PFT 3000/4G
* Transfer case with hydraulic pump connection
Hydrostatic Horizontal Split Shaft PTO.
OPH-3000K-B/H direct hydraulic pump mounted. Designed for hydraulic-driven hydrovac vehicles.
Equivalent to Muncie SSH2 & SSV2/4 SERIES POWER TAKE-OFF (3290220202, 3290120202), Horizontal Split Shaft (SSH).
PZB 3.2.90.1.(32901) and 3.2.90.2.(32902), 42901, 429012.
| MAIN DRIVE Maximum continuous torque | 400 Kgm | 4.000 (Nm)* |
| AUXILIARY OUTPUTS Maximum torque available at the shaft | 50 Kgm | 500 (Nm) |
| Available drive ratios | 1: 1.5 (standard) | 1: 1.2 (special) |
CONTROL | MECHANIC | PNEUMATIC |
| Power take-off is operational with the vehicle | Stationary or in motion |
| Direction of rotation | Opposite of engine |
| Weight: 40 kg |
Description:
• OPS-400K is a split-shaft power take-off for light vehicles.
• Truck size range: up to 8-ton trucks.
• Vacuum Truck | Water Jetting Truck | Hydraulic Aerial Platforms | Sewer Cleaning Combination Vehicles
There are two versions of engagement for the output shaft, both available with Manual Control and Pneumatic control.
OPS-400K is a split-shaft power take-off that can be mounted on rubbish skip washers, garbage collectors, firefighting vehicles, and sewer cleaning machines.
Equivalent to PFT 300
MAIN DRIVE | |
Maximum continuous torque | 3.000 Kgm | 30.000 Nm |
Maximum intermittent torque | 3.500 Kgm | 35.000 Nm |
Maximum intermittent torque (special version) | |
Maximum speed | 3.300 (rpm) |
AUXILIARY OUTPUTS | |
UPPER POWER TAKE-OFF | |
Maximum power available at the shaft | 380 (kW) |
Available drive ratios | 1/1,28 (standard), 1:1 (special) |
INTERMEDIATE POWER TAKE-OFF (Hydraulic) | |
Maximum power available at the shaft |
|
Ratio | 1/1,23 |
Shaft distance | 438 mm |
* Contact us for higher power, torque, or special ratio requirements. | |
* OPV-3500K series can transmit 4,200 NM torque at 2.000 RPM | |
DESCRIPTION: Direct or Clutch engagement | |
| Main Drive | |
|---|---|
| Torque | 3000 Kgm | 29.420 Nm |
| Output Shaft | |
| Torque | 130 Kgm | 1.275 Nm |
| Speed / RPM | |
| Output ratio | 1/1,28 |
| Output of Hydraulic | |
| Torque | 400 Nm | 3922 Nm |
| Output power | 50 Kw - 60 Kw |
| Output ratio | 1/1,28 |
* Contact us for higher power, torque, or special ratio requirements.
DESCRIPTION
Direct engagement/direct drive - Without Clutch
The OPV-3000K has been designed specifically for sewer-cleaning trucks. OPV-3000K is a split shaft power take-off whose dimensions and performance are particularly suitable for driving through Cardan shafts hydraulic pumps, blowers, compressors above the lorry’s frame. The flange for Cardan shafts can be mounted on either the differential or cabin sides. On the other hand, a flange can be installed for direct mounting of a hydraulic pump.
Equivalent to PFT 3000/4AV-E (PFT-4AV-E/3000), PFT-3000/2AV,
Muncie SSV series.
PZB 42903, 42904, 42905, 42906, 32903, 32904, 32905 (3.2.90.5), 32906(3.2.90.6).
| Main Drive Torque | 2100 Kgm I 20.593 Nm |
| Auxiliary Outputs | |
| Max Torque available at the shaft | 80 Kgm |
| Max. output speed | 1000 (rpm) |
| Output ratios | 1 / 1,90 / 2,30 |
| Truck Size Range | 8-18 tons |
| Available Outputs Hydraulic | |
| Torque | 40 Kgm |
| Available drive ratios | 1,90 |
| Shaft distance | 263,5 mm |
| Control | Air |
* Contact us for higher power, torque, or special ratio requirements.
DESCRIPTION
Aluminium Housing
Weight 78 kg
Engine-driven power take-offs for truck-mounted equipment and industrial applications -Drilling Rigs,
Equivalent to PFT-450/2AV (PFT - 2AV/450), PFT-1700/2AV.
This is a split-shaft power take-off for light vehicles and can be mounted on rubbish skip washers, garbage collectors, firefighting vehicles, and sewer cleaning machines.
| Inlet Torque | 800 Kgm | 7845 Nm |
| Outlet Torque | 50 Kgm | 490 Nm |
| Ratio | (1-1,25) TORQUE: 80 Kgm (785 Nm) - POWER (1000 rpm): 84 Kw (1-1,84) TORQUE: 90 Kgm (882 Nm) - POWER (1000 rpm): 94 Kw (1-2) TORQUE: 65 Kgm (638 Nm) - POWER (1000 rpm): 68 Kw (1-3,23) TORQUE: 45 Kgm (441 Nm) - POWER (1000 rpm): 47 Kw |
Description
Truck size range: 3 to 10 tons
Shaft distance: 237,5 mm
Weight: 42 kg
*Suitable for trucks without a PTO outlet
*Intermediate transmission system for heavy-duty trucks (Mitsubishi, Isuzu, Hino, etc.)
working type(3 options):
1- The pump runs while the vehicle is moving
2- Pump runs while the vehicle is in a stable position
3- Separate control of the outlets
equivalent: Parker Chelsea 901,
