PRODUCTS | REDUCTION GEARBOX

Main Drive Torque

between 85-90 Kgm (880 Nm)

Output Torque

between 35 Kgm -  75 Kgm (350-750 Nm)

Ratio

1/1 - 1/2,5 - 1/1,8

Description
Weight: 24 kg
Direct pump mounting version available.
Equivalent to Interpump, PZB, Hydrocar 3.4.2.6 (Transfer Case for ISO bolt pumps 3425, 3426)
Vertical version available HVR 100, 150, 200, PZB 100, 150, 200 

SPLITTER GEARBOX FOR ISO 4 BOLT PUMPS
The splitter gearbox is a gearbox that allows multiple outputs from a single input, which can be used for:
- Forestry and grab cranes with two separate hydraulic circuits,
- Flour, grain, cement, etc. The tank requires a hydraulic pump and a compressor for tipping and blowing, or for any other application that requires separate drives.
Depending on the selected unit, the output speed can be increased or decreased if required. However, a 1:1 ratio version is available. 

Inlet Torque

50 & 100 Kgm

Ratio

1/1 - 1/1,27 - 1/1,33 - 1/1,5 - 1/1,8 - 1/2 - 1/2,5 - 1/3,76

Description
weight : 26 kg - 32,5 kg

Torque 

80 Kgm

Ratio

1/1,5

with Clutch System (hot shift)

 

* Contact us for higher power, torque, or special ratio requirements.
Description
Multi-Purpose Reduction gearbox with internal Clutch System

Outlet Torque 

60 Kgm | 588 Nm 

Max Power available at shaft 

94 Kw

Max. output speed

3000 RPM

Ratio 

0,5

Rotation Sense 

The gearbox rotates in the opposite direction of the motor.

Air pressure 

between 8-10 bar

Weight 

55 KG

Working with Pneumatic Clutch System

DESCRIPTION: SAE 4 engine mounting transfer case,
* Contact us for higher power, torque, or special ratio requirements.

Torque 

80 Kgm | 785 Nm 

Ratio 1 / 1,5
  with Clutch System (hot shift)

* Contact us for higher power, torque, or special ratio requirements.
Description
Multi-Purpose Reduction gearbox with internal Clutch System (hot shift). 
* Clutch works with a pneumatic system
* You can engage and disengage the shaft while it is turning with our clutch. It is also called the hot shift.
RPM increaser, RPM Decreaser, 

Engin power

max 200hp

Engin speed

2000 RPM

Max. output speed

3000 RPM

Ratio

 

 

with Clutch System (hot shift)

Rotation Sense

The gearbox rotates in the opposite direction of the motor.
Engine cw (right)
Air compressor ccw (left)
Pump ccw (left) 

Weight

 

 

 

* Contact us for higher power or torque requirements. 

DESCRIPTION

include Additional Hydraulic clutch control and additional cooling system 
OPS370 Direct engine mount gearbox designed for Slurry Pumps.
Optima has launched a series of innovative Power-Take-Off (PTO) Clutches for direct-driven rock crushers, screeners, waste shredders, and other heavy-duty working machines.
Equivalent to KATSA gearboxes
 

Version R3 6.92
SPEED RATIO İ= 6,921
POWER - WEIGHT  P - W= 72kW - 200kg
MAX INPUT TORQUE M1= 500Nm
MAX INPUT SPEED n1= 4753 RPM
AXLE TECHNICAL CONDITIONS
MAX SPEED OF VEHICLE  Vmax= 75 km/h
AXLE ROAD Qdv= 98.1 kN (10t)
IMPULSE LOADING FROM THE SURFACE OF THE RAIL
X- LONGITUDINAL 1,8 / 16 g
Y- DIAGONAL  3,5 / 27,5 g
Z- VERTICAL 5 / 35,7 g
DESCRIPTION  
Equivalent  to Wikov Gearbox  
Main Drive Torque 60 Kgm | 588 Nm
Output Torque -
Ratio 1/2,5 - 1/1,8 
Weight 26 kg - 32,5 kg

* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTİON
Multi-Purpose Reduction gearbox with internal Clutch System.
* Clutch works with pneumatic system
* You can engage and disengage the shaft while it is turning with our clutch. It is also called the hot shift.
RPM increaser, RPM Decreaser, 

 

 

Torque 60 Kgm
Ratio 1/1
  with Clutch System (hot shift)

* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTION
Multi-Purpose Reduction gearbox with internal Clutch System

Main Drive Torque  40 Kgm 392 Nm 41,8 Kw
Output Torque  
Ratio 4/1
Description  
Weight 32 kg
Output Torque 1.785 Kgm - 17.500 NM
Speed 4000 rpm
Ratio 1/1
   
Description Firefight trucks, rotary drill vehicles, 
Output Torque  240 Kgm | 2.353 Nm 250 KW
Ratio 1/1,02
   
Weight  250 kg
Description Custom gearboxes, special gearboxes for mining, rotary drill vehicles, 
  multiple gear pump drive, engine mount gearbox, engine mount transfer case, engine mount pump drive,
Torque max 600 HP - 3000 KGM
Ratio 1-1/4 (1000 rpm to 250 rpm) 
Rotational speed  max 2500 rpm
  pneumatically operated
Weight 178 KG

* speed reducer (PTO, reduce the engine speed). 
* The OSR-600HP speed reducer is suitable for 30-ton vehicles.
* Designed to reduce the vehicle speed. Like: road marking and street marking vehicles. 
* The direction of rotation is the same as the engine. 
* speed change gearbox, special gearbox, speed decrease gearbox. 
* Equivalent to OMSI FLK1700 
Designed for 30-ton vehicles, this gearbox features a planetary gear system with a capacity of 400 HP / 3000 KGM of torque. When engaged, it reduces the incoming power by four times before transmitting it to the output. While the vehicle is in driving mode, it transmits all incoming power to the differential. 
Applications: Road Marking vehicles, Railway Vehicles, Catenary & Track maintenance vehicles (Tesmec, LineWise, Omac), Road and Rail Rescue and Recovery Vehicles ( Uromac), Sweeping Trucks,  Cleaning Trucks


 

Torque max 260 HP
Ratio 1:3,5 (1000 rpm to 250 rpm) 
Rotational speed  max 2500 rpm
  pneumatically operated
Weight 67 kg

* Speed Reducer (PTO, reduces the engine speed.)
* The direction of rotation is the same as the engine. 
* Designed to reduce the vehicle speed. Like: road marking, street marking vehicles, crop spraying machines, tar spraying machines, white lining trucks, road sweepers, refuse trucks.
* for medium-sized vehicles. 
* speed change gearbox, special gearbox, speed decrease gearbox. 
* Equivalent to omsi FLK1700
* Our speed reducers/gearbox is inserted into the transmission line to change the final drive speed. Reduction gearboxes allow the vehicle to travel at speeds as low as 0.01 Kilometers per Hour, upwards, depending on the vehicle's build and specification. Typical applications include crop-spraying machines, tar-spraying machines, white-lining trucks, road sweepers, refuse trucks, and any vehicle where controlled low-speed operation is necessary. These units are available for vehicles ranging from 3.5 tonne through to 30 tonne Gross Vehicle Weight.

Output Torque 110 Kgm 
1000 dev/dak (115kw) 
Max Speed 2800-3300 RPM 
Ratio 1/1
Weight 45 kg 

Description
New Clutched connection. Now you can engage and disengage shafts while they are working.
Other ratios are available on request.

Output Torque 60 Kgm 
1000 dev/dak (63 kw)
Max Speed 2800-3300 RPM
Ratio 1/1

Description
Weight: 21 kg 
Other ratios are available on request.

ORDER FORM