PRODUCTS | Reduction Gearbox
| Torque | 80 Kgm |
| Ratio | 1/1,5 |
* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTION
Multi-Purpose Reduction gearbox with internal Clutch System
| Main Drive Torque | between 85-90 Kgm (880 Nm) |
| Output Torque | between 35 Kgm - 75 Kgm (350-750 Nm) |
| Ratio | 1/1 - 1/2,5 - 1/1,8 |
Description
Weight: 24 kg
* Direct pump mounting version available.
Equivalent to Interpump/PZB/Hydrocar 3.4.2.6 (TRANSFER CASE FOR ISO BOLT PUMPS 3425, 3426)
Vertical version HVR 100, 150, 200
SPLITTER GEARBOX FOR ISO 4 BOLT PUMPS
The splitter gearbox is a gearbox that allows multiple outputs from a single input, which can be used for:
- forestry and grab cranes with two separate hydraulic circuits,
- flour, grain, cement, etc. The tank where a hydraulic pump and compressor are needed to tip and blow, - or any other application where various separate drives are required.
Depending on which unit is selected it is possible to increase or reduce output speed if required. However, a 1:1 ratio version is available.
| Torque |
80 Kgm | 785 Nm |
| Ratio | 1 / 1,5 |
* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTİON
Multi-Purpose Reduction gearbox with internal Clutch System (hot shift).
* Clutch works with pneumatic system
* You can engage and disengage the shaft while it is turning with our clutch. It is also called the hot shift.
RPM increaser, RPM Decreaser,
| Engin power | max 200hp | ||
| Engin speed | 2000 RPM | ||
| Max. output speed | 3000 RPM | ||
| Ratio | |||
| Rotation Sense | The gearbox rotates in the opposite direction of the motor. Engine cw (right) Air compressor ccw (left) Pump ccw (left) |
||
| Weight | |||
| * Contact us for higher power or torque requirements. | |||
| DESCRIPTION | |||
| include Additional Hydraulic clutch control and additional cooling system OPS370 Direct engine mount gearbox designed for Slurry Pumps. Optima has launched a series of innovative Power-Take-Off (PTO) Clutches for direct-driven rock crushers, screeners, waste shredders, and other heavy-duty working machines. Equivalent to KATSA gearboxes |
|||
| Version | R3 6.92 |
| SPEED RATIO | İ= 6,921 |
| POWER - WEIGHT | P - W= 72kW - 200kg |
| MAX INPUT TORQUE | M1= 500Nm |
| MAX INPUT SPEED | n1= 4753 RPM |
| AXLE TECHNICAL CONDITIONS | |
| MAX SPEED OF VEHICLE | Vmax= 75 km/h |
| AXLE ROAD | Qdv= 98.1 kN (10t) |
| IMPULSE LOADING FROM THE SURFACE OF THE RAIL | |
| X- LONGITUDINAL | 1,8 / 16 g |
| Y- DIAGONAL | 3,5 / 27,5 g |
| Z- VERTICAL | 5 / 35,7 g |
| DESCRIPTION | |
| Equivalent to Wikov Gearbox | |
| Main Shaft | |
|---|---|
| Torque | 85 kgm - 90 kgm |
| Outputs | 35 kgm - 75 kgm |
| Inlet Torque | 50 kgm |
| Ratio | 1/1 - 1/2,5 - 1/1,8 |
Description
weight : 24 kg
| Main Drive Torque | 60 Kgm | 588 Nm |
| Output Torque | - |
| Ratio | 1/2,5 - 1/1,8 |
| Weight | 26 kg - 32,5 kg |
* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTİON
Multi-Purpose Reduction gearbox with internal Clutch System.
* Clutch works with pneumatic system
* You can engage and disengage the shaft while it is turning with our clutch. It is also called the hot shift.
RPM increaser, RPM Decreaser,
| Inlet Torque | 60 kgm |
| Ratio | 1/2,5 - 1/1,8 |
Description
weight : 26 kg - 32,5 kg
| Torque | 60 Kgm |
| Ratio | 1/1 |
* Contact us for higher power, torque, or special ratio requirements.
DESCRİPTION
Multi-Purpose Reduction gearbox with internal Clutch System
| Main Drive Torque | 70 Kgm - 687 Nm |
| Output Torque | |
| Ratio | 4/1 |
| Description | |
| Weight | 29 kg |
| Output Torque | 1.785 Kgm - 17.500 NM |
| Speed | 4000 rpm |
| Ratio | 1/1 |
| Description | Firefight trucks, rotary drill vehicles, |
| Output Torque | 240 Kgm | 2.353 Nm |
| Ratio | 1/1,02 |
| Weight | : 250 kg |
| Description | Custom gearboxes, special gearbox for mining, rotary drill vehicles, |
| multiple gear pump drive, engine mount gearbox, engine mount transfer case, engine mount pump drive, |
| Torque | max 600 HP |
| Ratio | 1-1/4 (1000 rpm to 250 rpm) |
| Rotational speed | max 2500 rpm |
| Weight | 178 KG |
* speed reducer (PTO, reduce the engine speed).
* The OPS-562 speed reducer is suitable for 30-ton vehicles.
* Designed to reduce the vehicle speed. Like: road marking, and street marking vehicles.
* The direction of rotation is the same as the engine.
* speed change gearbox, special gearbox, speed decrease gearbox.
* Equivalent to OMSI FLK1700
| Torque | max 260 HP |
| Ratio | 1-1/4 (1000 rpm to 250 rpm) |
| Rotational speed | max 2500 rpm |
| Weight | 67 kg |
* Speed Reducer (PTO, reduces the engine speed.)
* The direction of rotation is the same as the engine.
* Designed to reduce the vehicle speed. Like: road marking, street marking vehicles, crop spraying machines, tar spraying machines, white lining trucks, road sweepers, refuse trucks.
* for medium-sized vehicles.
* speed change gearbox, special gearbox, speed decrease gearbox.
* Equivalent to omsi FLK1700
* Our speed reducers/gearbox is inserted into the transmission line to change the final drive speed. Reduction gearboxes allow the vehicle to travel at speeds as low as 0.01 Kilometers per Hour, upwards, depending on the vehicle's build and specification. Typical applications include crop spraying machines, tar spraying machines, white lining trucks, road sweepers, refuse trucks, and any vehicle where controlled low-speed operation is necessary. These units are available for vehicles ranging from 3.5 tonne through to 30 tonne Gross Vehicle Weight.
