PRODUCTOS | Caja de cambios hidrostática
| Mechanic Drive Torque | 3.000 Kgm | 29.420 Nm |
| Hydrostatic Drive Torque | 105 Kgm | 1.029 Nm |
| Auxiliary Outputs | |
|---|---|
| Max Torque available at shaft | |
| Maximum Speed | 3.950 rpm |
| Available ratios | 1/1-4,5/1, 0.98-4.41/1 |
| Power-pump outputs | kW |
| Control | Pneumatic |
| Hydraulic Pump distance is | 382 mm |
Weight: 210 kg
Equivalent to HT 380/3000, HT600/3000, RPM15,
DescriptionThe
La caja de cambios OPS-782 para sistemas de transmisión combinados está diseñada para vehículos con un tren de tracción superior a 18 toneladas, que requieren velocidades muy bajas y un control sencillo durante el trabajo (hidrostático) y que requieren la recuperación de la transmisión mecánica durante la transferencia, lo que permite alcanzar la velocidad máxima. Algunos ejemplos de aplicación son vehículos para camiones barredores de calles y de aeropuertos (barredoras), vehículos de limpieza de alta presión y aspiración, limpiadores de alcantarillado, tanques sépticos y baldeadores de calles. Grupos para la transmisión mecánica e hidrostática con soportes de brida para bombas y motores hidráulicos. Están configurados con un par de bombas hidráulicas y un motor hidráulico que, al conectarse a través de un circuito hidráulico, permiten la conversión de la tracción del vehículo de mecánica a hidrostática. TDF de eje dividido y transmisión de arrastre, todo en una sola caja de cambios
| Torque mechanical drive | 3.000 Kgm | 29.420 Nm |
| Torque hydrostatic drive | 100 Kgm | 1.000 Nm |
| Auxiliary Outputs | |
|---|---|
| Max Torque available at the shaft | |
| Maximum Speed | 3.500 (rpm) |
| Available ratios | 1/1 - 4.5/1 |
| Power-pump outputs | 154 kW |
| Control | Pneumatic | operating air pressure range: 7-8 bar |
| Hydraulic Pump distance is: | 350 mm |
Weight: 170 kg
Equivalent to HT 400/1200, HT 380/3000.
However, OPS-852's main shaft torque is three times stronger than that of HT400/1200.
Description
La caja de cambios OPS852 para sistemas de transmisión combinados está diseñada para vehículos con un tren de tracción superior a 18 toneladas, que requieren velocidades muy bajas y un control fácil durante la operación (hidrostático), y que requieren que la transmisión mecánica se restablezca durante la transferencia, lo que permite alcanzar la velocidad máxima. Algunos ejemplos de aplicación son: vehículos para camiones barredores de calles y camiones de aeropuerto (barredoras), vehículos de limpieza de alta presión y aspiración, limpiadores de alcantarillado y fosas sépticas, y baldeadores de calles. Grupos para la transmisión mecánica e hidrostática con montajes de brida para bombas y motores hidráulicos. Están equipados con un par de bombas hidráulicas y un motor hidráulico que, al conectarse a través de un circuito hidráulico, permiten la conversión de la tracción del vehículo de mecánica a hidrostática.
| HYDROSTATIC CASE MODULE | |||
| Maximum continuous torque | 5.500 (Nm) | ||
| Maximum intermittent torque | max 7.800 (Nm) | ||
| Maximum speed | 3.100 Rpm | ||
| Available drive ratios | Standart 1/4,41 * Special Hydraulic motor ratio is: i= 1:17,28 | 22 | 31 |
||
| MAIN DRIVE | |||
| Maximum continuous torque | 3.000 Kgm | 30.000 Nm | ||
| Maximum intermittent torque | 3.500 Kgm | 35.000 Nm | ||
| Maximum intermittent torque (special version) | |||
| Maximum speed | 3.300 (rpm) | ||
| AUXILIARY OUTPUTS | |||
| 1-UPPER POWER TAKE-OFF | |||
| Maximum power available at the shaft Maximum intermittent available torque Power take-off operational with vehicle |
From 340 (kW)* to 380 (kW)* 2.200 (Nm)* Stationary and in motion |
||
| Ratio | 1/1,28 (standard), 1:1 (special) | ||
| 2-INTERMEDIATE POWER TAKE-OFF (Hydraulic) | |||
| Maximum power available at the shaft Power take-off operational with vehicle |
|||
| Ratio | 1/1,23 | ||
| Shaft distance | 438 mm | ||
| * Contact us for higher power, torque, or special ratio requirements. | |||
| OPS 923 series can transmit 4,200 NM torque at 2.000 RPM | |||
|
DESCRIPTION: For Hydrostatic and Mechanical Transmission. Creep Drive. |
| HYDROSTATIC CASE MODULE | |||
| Maximum continuous torque | 5,500 (Nm) | ||
| Maximum intermittent torque | max 7,800 (Nm) | ||
| Maximum speed | 3,100 Rpm | ||
| Available drive ratios | Standard 1/4,41 * Special Hydraulic motor ratio is: i= 1:17,28 | 22 | 31 |
||
|
Speed Decreaser |
5.4 / 10.35 / 12.21 / 15.29 / 17.75 / 21.45 / 31.80 / 36.24 |
||
| MAIN DRIVE | |||
| Maximum continuous torque | 3.000 Kgm | 30.000 Nm | ||
| Maximum intermittent torque | 3.500 Kgm | 35.000 Nm | ||
| Maximum intermittent torque (special version) | |||
| Maximum speed | 3.300 (rpm) | ||
| AUXILIARY OUTPUTS | |||
| 1-UPPER POWER TAKE-OFF | |||
| Maximum power available at the shaft Maximum intermittent available torque Power take-off operational with vehicle |
From 340 (kW)* to 380 (kW)* 2.200 (Nm)* Stationary and in motion |
||
| Ratio | 1/1,28 (standard), 1:1 (special) | ||
| 2-INTERMEDIATE POWER TAKE-OFF (Hydraulic) | |||
| Maximum power available at the shaft Power take-off operational with vehicle |
|||
| Ratio | 1/1,23 | ||
| Shaft distance | 438 mm | ||
| * Contact us for higher power, torque, or special ratio requirements. | |||
| * OPS 923 series can transmit 4,200 NM torque at 2.000 RPM | |||
| DESCRIPTION: For Hydrostatic and Mechanical Transmission. Creep Drive. Dual-clutch drive for top Hydraulic pumps and hydrostatic driveline for creep control. * Equivalent to PFT-PCH/3000 The Transfer Case OPS923/H with a hydrostatic case module mounted at the main transmission output. It has been designed primarily for dry vacuum equipment, road and airport maintenance vehicles for asphalt regeneration, and vehicles for hi-rail applications. |
|||
| Max input torque | Direct drive: 3000 Nm Motor: 1100 Nm |
| Max.input speed | Direct drive: 2500 rpm Motor: 3500 rpm |
| Ratio | Motor driven: 14.62 |
| Application Area | Truck Cranes |
| Description | Equivalent to omsi RPM15300 |
| Max input torque | 350 Nm |
| Max.input speed | 450 rpm |
| Ratio | 6.6 |
| Application Area | Aerial work platform |
| Description |
| Max input torque | Large Motor: 800 Nm Small Motor:1100 Nm |
| Max.input speed | 5000 rpm |
| Ratio | Large Motor: 1.51 Small Motor: 3.83 |
| Application Area | Loaders |
| Description | omsi HT400 |
| Max input torque | 1500 Nm |
| Max.input speed | 2500 rpm |
| Ratio | Wind turbine: 0.58 Water pump: 0.71 Motor: 6.46 |
| Application Area | Sweepers |
| Description | omsi HT 600 |
| Main Drive | |
|---|---|
| Maximum continuous torque | 3.000 Kgm I 29.420 Nm |
| Output Shaft - UPPER POWER TAKE-OFF | |
| Maximum continuous torque Maximum torque (special version) |
110 Kgm I 1.100 Nm * 200 Kgm I 2.000 Nm |
| Speed / RPM | |
| Output ratio | 1 / 1,27 |
| Auxiliary Output - Hydrostatic | |
| Torque | 80 Kgm I 785 Nm |
| Max. output power | |
| Output ratio | 1 / 2,30 |
Additional Hydraulic pump output: 400 Nm and 35 kW Power
* Comuníquese con nosotros para conocer los requisitos de mayor potencia, par o relación especial.
Description
Weight: 181 kg
Equivalent to PZB 42903 HT, 42904 HT, 4.2.90.3.HT. - 4.2.90.4.HT, PFT-PCH/3000,
* tailor-made gearboxes, custom made gearbox, bespoke gearbox
